Safety Measures You Must Know!
Safety is already the least you can do for your electrical wiring. Before you can install wiring, you need to make sure you know where your wires should be. Never install wiring in the attic, near heating ducts, or heat sources, or near water pipes. Also, never install wiring close to windows and doors, or in areas that are often opened and closed. When possible, always route wires away from areas that are highly anticipated, like your living room or master bathroom. These areas should always be at the center of your house. Here are two important electrical installation tips:
At What Height Should Wiring Be Installed?
You need to consider this when installing your electrical wires. The best is to install the cables at the eye level of your ceiling. You can also install your cables higher if you want to cover the rafters. If you’re installing your cables higher than your ceiling, make sure to use a wire access rake and fish wire through the holes. This will make it easier to reach cables higher up in your ceiling.
What Are the Best Ways to Route Wires?
When installing your wires, make sure you consider how you want your cables to be organized and labeled. You can use different methods when it comes to wiring and you can use either permanent or temporary labeling. For better organization, you can use pull-wire labeling that you can unsnap and move to the different boxes. The best way to insulate your wiring is to route them behind drywall panels. You can then cover your exposed wires with a cable cover and then insulate the cover. When you are installing your cables in different parts of the house, consider using a cable manager.
Solo Trade Services contractors can help you with your electrical installation project in Copperas Cove, TX. You can give us a call at (254) 258-1668 now!